GZP · Transport

Taxi Service

Taxi

Taxi Varies by destination

Metered taxis wait outside T arrivals 24/7

Right outside terminal T at Gazipaşa-Alanya Airport, a line of yellow metered taxis sits at the main exit doors, operating 24 hours a day for incoming flights. You pay in Turkish lira by the meter, and most airport taxis also accept cash euros for runs into Alanya, Mahmutlar, or other resort towns along the D400 coast road.

Average ride time into central Alanya sits around 35–45 minutes, depending on D400 traffic and hotel location. Shorter hops to nearby towns like Gazipaşa often come in under 20 minutes, while trips to Konaklı or Avsallar can stretch to 50–60 minutes in peak summer. The key variable is the single main coastal road that links GZP with the resort strip.

Taxis queue on demand, so there is usually a car ready within 5 minutes of leaving baggage reclaim in terminal T. There is no fixed timetable or frequency; cars pull up continuously as flights from cities like Istanbul and Ankara land. In shoulder season late at night, you might wait 10 minutes while a new batch of taxis arrives, but gaps longer than that are rare.

Fares run by meter from the airport, with a starting fee plus a per‑kilometer rate that local authorities adjust periodically, often once a year. Drivers can quote a ballpark price to Alanya city center before departure, and it is normal to round up small amounts when paying in cash. Always confirm if card payments are accepted before you load bags, as some taxis still run cash‑only.

Taxis load at a marked stand just beyond the public arrivals meeting point inside T, then exit via the one-way loop in front of the terminal. Larger parties with 3–4 checked suitcases should flag a station attendant at the stand and ask for a station wagon, which usually shows up within 5–10 minutes and handles bulkier luggage better than a standard sedan.

One practical tip: screenshot your hotel name and address with a map pin before landing, then show it to the driver at the taxi stand outside terminal T to avoid language issues and wrong turns off the D400.

Step by step

  1. 01 Exit the terminal and locate the taxi stand.
  2. 02 Confirm your destination with the driver.
  3. 03 Get in and enjoy your ride.
  4. 04 Pay the fare upon arrival.
Watch out for
  • Not confirming the fare before departure.
  • Getting into an unlicensed taxi.
  • Assuming all taxis accept credit cards.

Other transport at GZP